z Contents omitted in this manual Though the following jobs are omitted in the explanation in this manual, they should be conducted in actual work: Jacking up and lifting Cleaning and washing of removed parts as required Visual inspection 3) 4) 5) (3) Definition of Terms [NOTICE]: Instruction whose negligence is very likely to cause an accident. Always observe it. Standard: Allowable range for inspection and adjustment. Limit: The maximum or minimum value that must be satisfied during inspection or adjustment. (4) Abbreviations Abbreviation Meaning Abbreviation Meaning Assy assembly T.D.C. top dead center Sub-Assy sub-assembly B.D.C.
bottom dead center a.T.D.C after top dead center OS oversize b.T.D.C before top dead center US undersize STD Standard Min-1 revolutions per minute IN Intake PS Output (metric horsepower) EX Exhaust T Bolt/nut tightening torque