Komatsu — 5.5.1 Trochoid pump inspection and measurement

5. Lubrication System 5.5 Parts Inspection and Measurement 5.5.1 Trochoid pump inspection and measurement (1) Outside clearance and side clearance of outer rotor Insert a gap gage between a outer rotor and a pump body, and measure the clearance. Outside clearance mm When measuring a side clearance, put a right-angle gage to the pump body, insert a gap gage and measure the clearance.

Side clearance mm (2) Inner rotor and gear boss clearance (3TNV82A-4TNV88) 110 Model Standard Limit 3TNV82A 88 0.12 0.21 0.30 4TNV94L/98 0.100 0.155 0.25 4TNV106(T) 0.100 0.165 0.25 Model Standard Limit 3TNV82A 88 0.02 0.07 0.12 4TNV94L/98 0.05 0.10 0.15 4TNV106(T) 0.03 0.12 0.17 Item Part Standard dimension (mm) Standard clearance (mm) Standard clearance limit (mm) Inside clearance of inner rotor Gear boss diameter 53.05 53.15 0.3 0.5 0.6 Rotor inner diameter 53.45 53.55 Width across flat clearance of inner rotor Width across flat of gear boss 49.45 49.75 0.2 0.6 0.7 Width across flat of rotor 49.95 50.05