Komatsu — 10.1.3 Wiring diagram

10. Alternator 10.1.2 Specifications 10.1.3 Wiring diagram [NOTICE] 1) Don't do miss-wiring and short-circuit of each terminal. 2) Don’t short-circuit between IG and L. (Connect it through the charge lamp.) 3) Don’t connect a load between L and E. 4) Don't remove a battery terminal and a B terminal when rotating. 5) Shut out a battery switch during the alternator stop. 6) Tightening torque of each terminal:

1.7-2.3N cm) m (17-23kgf 177 Manufacturer’s model (Hitachi) - ACFA68 Code - 129423-77200 Rating - Continuous Battery voltage V 12 Nominal output (13.5V heat) A 40 Rated revolution min-1 5,000 Operating revolution min-1 1,350 18,000 Grounding characteristics - Minus side grounding Direction of revolution (viewed from pulley) - Clockwise Integrated regulator IC regulator Weight kg 2.8 Pulley (outside diameter) mm 69.2 Belt shape - Type A