Komatsu — 12.2.3 Cylinder block

12. Service Standards (2) Idle gear shaft and bushing mm (3) Backlash of each gear mm 12.2.3 Cylinder block (1) Cylinder block mm 190 Inspection item Standard Limit Reference page Shaft outside diameter 45.950 45.975 45.900 4.3.5(2) Bushing inside diameter 46.000 46.025 46.075 Clearance 0.025 0.075 0.175 Model Inspection item Standard Limit Reference page 3TNV82A 88 Crank gear, cam gear, idle gear, fuel injection pump gear and PTO gear 0.07 0.15 0.17 4.3.4.

4TNV94L 4TNV98(T) 4TNV106(T) Crank gear, cam gear, idle gear, fuel injection pump gear and PTO gear 0.08 0.14 0.16 Lubricating oil pump gear 0.09 0.15 0.17 Balancer drive gear (only for 4TNV106(T)) 0.12 0.18 0.20 Inspection item Standard Limit Reference page Cylinder inside diameter 3TNV82A 82.000 82.030 82.200 4.4.5.(1) TNV84 84.000 84.030 84.200 TNV88 88.000 88.030 88.200 4TNV94L 94.000 94.030 94.130 4TNV98 98.000 98.030 98.130 4TNV106(T) 106.000 106.030 106.130 Cylinder bore Roundness 0.01 or less 0.03 Inclination