Komatsu — 2.2.6 Inspection every 1,000 hours or one year

2. Inspection and Adjustment 2.2.6 Inspection every 1,000 hours or one year Be sure to check the following points every 1,000 hours or one year operation, whichever comes first. ( 1) Coolant water replacement Coolant water contaminated with rust or water scale reduces the cooling effect. Even when antifreeze agent (LLC) is mixed, the coolant water gets contaminated due to deteriorated ingredients. Replace the coolant water at least once a year. 1) Remove the radiator cap. 2) Loosen the drain plug at the lower portion of the radiator and drain the coolant water. 3) After draining the coolant water, tighten the drain plug. 4) Fill radiator and engine with coolant water.

Refer to 3.4 B eware of scalding by hot water Wait until the temperature goes down before draining the coolant water. Otherwise, hot water may splash to cause scalding. 37 No. Inspection Item (1) Coolant water replacement (2) Diaphragm assy inspection (3) Turbocharger blower cleaning* (4) Intake/exhaust valve clearance adjustment (5) Fuel injection nozzle pressure inspection