Komatsu — 4.2.4 Servicing points

4. Disassembly, Inspection and Reassembly of Engines 4.2.4 Servicing points Point1 [Disassemble] z Loosen the mounting bolt while supporting the alternator. Do not tilt the alternator toward the cylinder block in haste since it may damage the alternator or pinch a finger. [Reassemble] z The belt deflection shall be checked according to 2.2.2. in Chapter2. [Reassemble] z Replace the belt with a new one if cracked, worn or damaged. z Carefully prevent the belt from being smeared with oil or grease. Point2 [Reassemble] z Check the thermostat function. (See3.9 in Chapter 3 for the check procedure.) Pont3 [Reassemble] z Replace the fuel filter element with a new one.

[Disassemble] z Cover the fuel pipe opening with tape to prevent intrusion of foreign matters. Point4 [Reassemble] z Replace the oil filter with a new one. z After fully tightening the filter manually, retighten it with a filter wrench (see 11.1-6 in Chapter 11) by 3/4 turn. Point5 [Disassemble] z Cover the fuel injection pipe and pump inlets and outlets with tape or the like to prevent intrusion of foreign matters. 72