Yanmar — Yanmar Electronic Control System Technical Manual for Classic, BY2, 6LY3, 6CX, and SY GEN III Series Engines

4 Gauges 6LY3, 6CX, SY GEN III, alternate BY2 Unlimited 6LY3, 6CX, SY GEN III, alternate BY2 Unlimited series engines Serial Gauge (i2200) Series This Gauge Series uses the Tachometer to decode the CAN Bus information for all gauges in the set. On the BY2 Unlimited an i5601E and i2200 Series Gauges may be used as an alternative to the display inside the tachometer and/or speedometer. Specifications Storage Temperature: -40°C (-40°F) to +80°C (+176°F). Operating Temperature: -18°C (0°F) to +70°C (+158°F). Humidity: Pass 100-hour humidity test per Section 24.7.4 of ABYC P-24. Salt Spray Atmosphere: Pass 300 hours of salt fog per ASTM B117. Water Resistance (Hose Down):

The gauges and SIM shall not allow any water to enter any of the enclosures when exposed to 100 liters of water per minute for three minutes per component using a 12.5 mm nozzle. The water shall be directed to all exposed surfaces during the three-minute test. SAE J1455 Section 4.4.3 Immersion: The gauges shall be tested per IEC 60529 (IP67) and/or SAE J1171 immersion. Fogging: Gauge lens shall meet or exceed the criteria specified in J1810, Lens Fogging (Indicating Unit). 3” Gauge rear view 2” Gauge rear view © 2011 Yanmar Marine International • Rev. 2.0 4:20 Yanmar Electronic Control Systems Technical Manual