Yanmar — Yanmar Electronic Control System Technical Manual for Classic, BY2, 6LY3, 6CX, and SY GEN III Series Engines

Section 10 transmission connection diagrams Before performing any operations within this section, review the “Safety Section” starting on page xviii. WARNING sudden movement hazard When working on transmissions or shift connections, exercise caution as the control action may change. shock hazard ALWAYS turn off the battery switch (if equipped) or disconnect the negative battery cable before servicing the equipment. Exercise caution, as electical shock may cause an involuntary “pull back” reaction resulting in additional injury. Yanmar engines are used with a variety of transmissions.

This section shows the connections to the most popular units and most of the others connect in a way similar to one of these. The table below shows the models that are used with various engines. © 2011 Yanmar Marine International • Rev.

2.0 Yanmar Electronic Control Systems Technical Manual 10:1 Engine/Hp ZF Gear Kanzaki Gear Twin Disc Gear LY3 380 Hp 85A, 220A, 851V KMH 61A or 61V MG5061A 440 Hp 280a, 280-1, 85A KMH 61A or 61V MG505A, MG5061A 480 Hp 280A, 280-1, 85A KMH 61A or 61V BY 150 Hp 63C, 63A 63IV KMH 40A, KMH40V 180 Hp 63C, 63A 63IV KMH 40A, KMH40V 220 Hp 63C, 63A 63IV KMH 40A, KMH40V KMH 50A, KMH 50V 260 Hp 63C, 63A 63IV KMH 40A, KMH40V KMH 50A, KMH 50V CX 286A, 286IV, 280A KMH 70A SY 655 Hp 305A 700 Hp 325A, 325IV 900 Hp 350A, 350IV