Yanmar — Yanmar Electronic Control System Technical Manual for Classic, BY2, 6LY3, 6CX, and SY GEN III Series Engines

10 Transmission Connect. Diags. 6LY3, 6CX ZF Transmission Connections with CE425XX (new), no Trolling The connectors are marked 24 volts. This is correct for 12 and 24 volt installations. Connectors are polarity sensitive. Be sure to connect the “+” (yellow wire) to pin #1. Connects to Transmission Alarm Switch Connects to Shift A Connects to Shift B Note: This connector is the same on the 6CX engine. ZF Transmission Harness CE41906 Connects to Trolling (TIED OFF if not equipped for trolling) Engine Connection Enlarged CE425XX Cable Connects to i8320/25 *Note: See page 10:15 for updated information on ZF transmission connectivity. © 2011 Yanmar Marine International • Rev.

2.0 10:10 Yanmar Electronic Control Systems Technical Manual