3 i5601E Digital Display Monitor Settings Depth Offset WARNING sudden movement hazard Changing this setting without full understanding could cause a dangerous grounding incident. Displayed screen shows current depth value and allows Depth Offset to be added. The “Depth Offset” is a fixed amount to be added or subtracted from the depth reading. This allows compensation for keels or depths from the water surface to be displayed. Select a positive number equal to the vertical distance between the transducer and waterline for depth at the waterline; or select a negative number equal to the vertical distance between the transducer and keel for depth at the keel.
The current depth as measured by the transducer is listed for comparison to a known depth value. © 2011 Yanmar Marine International • Rev. 2.0 3:22 Yanmar Electronic Control Systems Technical Manual Display Choice Function DEPTH OFFSET Variable % adjustment factor. 0=no adjustment. For meters the Range is 32.8 to 32.7m. For feet Range is -107 to 107.4 Ft.