3 i5601E Digital Display calibration Validation of Option Available The entry to the Trolling Menu is allowed only if the Trolling Option is available. This will be checked on entry into the menu. If not allowed, this warning will be displayed: Note: If this display occurs and trolling is present, go to the “Factory Settings” menu and manually select “Trolling” under the “System Select” menu. Loading Display Data Upon entry into the User Settings Menu, the software will get data from the Engine Interface and the Control Heads. If necessary, the software will try up to 3 times to connect and retrieve data from the units. “Retry” will try to retrieve the settings again.
This will give the user a chance to fix a problem and then retry again. “OK” to continue without retrieving the failed settings. If this is done some menu items will be missing and others will display "…" for no available data. “BACK” returns to the Main Menu. The following status will be displayed: If retrieval is successful, the user will be presented with the “Troll Settings Menu” (see below). © 2011 Yanmar Marine International • Rev. 2.0 3:36 Yanmar Electronic Control Systems Technical Manual Engine Interface Processing Transfer OK Transfer Failed Is ignition on? Control Head Processing Transfer OK Transfer Failed Connection Problem?