SEBU8598 69 Maintenance Recommendations Coolant Level - Check i03842450 Coolant Level - Check SMCS Code: 1395-082 Check the coolant level when the engine is stopped and cool. Illustration 51 g00103639 Typical filler cap gaskets 3. Clean the cooling system filler cap and check the condition of the filler cap gaskets. Replace the cooling system filler cap if the filler cap gaskets are damaged. Reinstall the cooling system filler cap. Illustration 50 g00285520 Cooling system filler cap 4. Inspect the cooling system for leaks. i04134625 Coolant Sample (Level 1) - Obtain Pressurized System: Hot coolant can cause seri- ous burns.
To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. SMCS Code: 1350-008; 1395-008; 1395-554; 7542 Note: Obtaining a Coolant Sample (Level 1) is optional if the cooling system is filled with Cat ELC (Extended Life Coolant). 1. Remove the cooling system filler cap slowly in order to relieve pressure. Note: Obtain a Coolant Sample (Level 1) if the cooling system is filled with any other coolant instead of Cat ELC including the following: 2. Maintain the coolant level within 13 mm (0.5 inch) of the bottom of the filler pipe.
If the engine is equipped with a sight glass, maintain the coolant level to the proper level in the sight glass. Commercial long life coolants that meet the Caterpillar Engine Coolant Specification -1 (Caterpillar EC-1) Cat DEAC (Diesel Engine Antifreeze/Coolant) Commercial heavy-duty coolant/antifreeze Table 10 (continued) Recommended Interval Type of Coolant Level 1 Level 2 Cat DEAC or any coolant other than Cat ELC Every 500 Hours(1) Yearly(2) Cat ELC Optional Yearly(2)