Caterpillar — Caterpillar C15 and C18 Engine Operation and Maintenance Manual

SEBU8598 89 Maintenance Recommendations Overhaul Considerations The following factors are important when a decision is being made on the proper time for an engine overhaul: After Failure Overhaul If a major engine failure occurs and the engine must be removed, many options are available. An overhaul should be performed if the engine block or the crankshaft needs to be repaired. The need for preventive maintenance The quality of the fuel that is being used If the engine block is repairable and/or the crankshaft is repairable, the overhaul cost should be between 40 percent and 50 percent of the cost of a new engine with a similar exchange core.

The operating conditions The results of the S·O·S analysis Note: The aftertreatment system can be expected to function properly for the useful life of the engine (emissions durability period), as defined by regulation, subject to prescribed maintenance requirements being followed. This lower cost can be attributed to three aspects: Specially designed Caterpillar engine features Caterpillar dealer exchange components Oil Consumption as an Overhaul Indicator Caterpillar Inc. remanufactured exchange components Overhaul Recommendation Oil consumption, fuel consumption, and maintenance information can be used to estimate the total operating cost for your Caterpillar engine.

Oil consumption can also be used to estimate the required capacity of a makeup oil tank that is suitable for the maintenance intervals. To minimize downtime, Caterpillar Inc. recommends a scheduled engine overhaul by your Caterpillar dealer before the engine fails. A scheduled engine overhaul will provide you with the best cost/value relationship. Oil consumption is in proportion to the percentage of the rated engine load. As the percentage of the engine load is increased, the amount of oil that is consumed per hour also increases. Note: Overhaul programs vary according to the engine application and according to the dealer that performs the overhaul.

Consult your Caterpillar dealer for specific information about the available overhaul programs and about overhaul services for extending the engine life. The oil consumption rate (brake-specific oil consumption) is measured in grams per kW/h (lb per bhp). The brake-specific oil consumption (BSOC) depends on the engine load. Consult your Caterpillar dealer for assistance in determining the typical oil consumption rate for your engine. If an overhaul is performed without overhaul service from your Caterpillar dealer, be aware of the following maintenance recommendations.

When the oil consumption of an engine has risen to three times the original oil consumption rate due to normal wear, an engine overhaul should be scheduled. There may be a corresponding increase in blowby and a slight increase in fuel consumption. Rebuild or Exchange Cylinder Head Assembly, Cylinder Packs, Oil Pump, and Fuel Transfer Pump Overhaul Options These components should be inspected according to the instructions that are found in various Caterpillar reusability publications. The Special Publication, SEBF8029 lists the reusability publications that are needed for inspecting the engine parts.

Before Failure Overhaul A planned overhaul before failure may be the best value for the following reasons: If the parts comply with the established inspection specifications that are expressed in the reusable parts guideline, the parts should be reused. Costly unplanned downtime can be avoided. Many original parts can be reused according to the standards for reusable parts. Parts that are not within the established inspection specifications should be dealt with in one of the following manners: The service life of the engine can be extended without the risk of a major catastrophe due to engine failure.

Salvaging Repairing The best cost/value relationship per hour of extended life can be attained. Replacing