SEBU8598 91 Maintenance Recommendations Power Take-Off Clutch - Check S·O·S Coolant Analysis (Level 2) provides a report of the results of both the analysis and the maintenance recommendations. Personal injury can result from air pressure. Personal injury can result without following prop- er procedure. When using pressure air, wear a protective face shield and protective clothing. For more information about coolant analysis, see your Caterpillar dealer. Maximum air pressure at the nozzle must be less than 205 kPa (30 psi) for cleaning purposes. i03901481 Power Take-Off Clutch - Check SMCS Code: 3055-535 6. Dry the oil cooler core with compressed air.
Direct the air in the reverse direction of the normal flow. 7. Inspect the components in order to ensure cleanliness. The oil cooler core should be pressure tested. Repair the oil cooler core, if necessary. Install the oil cooler core. NOTICE New power take-offs should have the clutch adjust- ment checked before being placed into service. The clutch adjustment should be checked again after the first ten hours of operation. New clutch plates have a “wear period, and the clutch may require several adjustments until the new plates are “worn in”. For more information about cleaning the cores, consult your Caterpillar dealer.
Obtain Coolant Analysis The concentration of supplemental coolant additive (SCA) should be checked regularly with test kits or with S·O·S Coolant Analysis (Level 1). Further coolant analysis is recommended when the engine is overhauled. For example, considerable deposits are found in the water jacket areas on the external cooling system, but the concentrations of coolant additives were carefully maintained. The coolant water probably contained minerals that were deposited on the engine over time. A coolant analysis can be conducted in order to verify the condition of the water that is being used in the cooling system.
A full water analysis can be obtained by consulting your local water utility company or an agricultural agent. Private laboratories are also available for water analysis. Illustration 65 g00781502 (1) Instruction plate (2) Serial number plate Caterpillar Inc. recommends an S·O·S Coolant Analysis (Level 2). Check the clutch adjustment regularly after “wear in”. Heavy-duty applications which have engagements that are frequent and relatively long periods of clutch slippage require more frequent adjustment than light- duty applications. The operating torque should be measured in order to determine if a clutch adjustment is required.
S·O·S Coolant Analysis (Level 2) An S·O·S Coolant Analysis (Level 2) is a comprehensive coolant analysis which completely analyzes the coolant and the effects on the cooling system. An S·O·S Coolant Analysis (Level 2) provides the following information: Refer to the OEM information and instruction plate (1) for instructions on lubrication, adjustment, and other recommendations for service. Perform the maintenance that is specified on the instruction plate. Complete S·O·S Coolant Analysis (Level 1) Visual inspection of properties Identification of metal corrosion Identification of contaminants Identification of built up impurities (corrosion and scale)