Kaiyi — Kaiyi Power Train System Technical Manual

(12) Lift the clutches out of the housing in numerical order as described in the legend. 7 6 1 K1 clutch 2 K2 clutch 3 K3 clutch 4 K4 clutch 5 KR clutch 6 KV clutch 7 input shaft 2 3 4 5 1 7609ATM057 (13) Remove bearing outer rings (arrows) from the housing rear part. If, contrary to the recommendation, the tapered roller bearings of clutches, input and output are not replaced, it is imperative to ensure the previous pairing (bearing outer ring/ bearing inner ring). ц Bearing outer ring and bearing inner ring must be marked. 7609ATM058 ц The lubrication lines are rolled in (1 and 2) and are highly difficult to remove.

In case of damage, use of the appropriate special tool is imperative for fitting or replacing these components. 1 2 7609ATM059 3-109