Σ Lift piston (1) by means of compressed air out of the cylinder bore and remove it. 1 7609ATM144 Τ Remove both O-rings (1 and 2). 1 2 7609ATM145 (7) Input shaft Input shaft Η Snap out piston ring (1). Turbine wheel shaft and drive gear (2) are fixed by a snap ring. 1 2 ц When separated, the components will be destroyed. 7609ATM146 Θ Pull tapered roller bearing (inner ring) off the drive gear. Basic tool 5873 001 000 Grab sleeve 5873 001 058 or Rapid grip 5873 011 014 7609ATM147 3-131