刴 Preload cup spring package by means of assembly aid (S1) and pressure piece (S2), until L-ring has engaged into the annular groove. S1 S2 Assembly aid (S1) 5870 345 088 Assembly fixture (S 倜 S2) 5870 345 124 (Inner installer and pressure piece) 侍 It is always necessary to mount a new L-ring. 7609ATM228 Disk carrier with piston retraction : 2 1 1 Cup spring package 2 L-ring 3 Disk carrier 4 Piston with O-rings 3 4 7609ATM229 刵 Install outer and inner disks alternately into the disk carrier (4) as personated in figure TM230.
1 Friction disk-coated on one side (1 pcs) 2 Outer disks (7 pcs) 3 Inner disks (7 pcs) 3 2 侍 Take care that the uncoated (blank) side of the friction disk (1) is showing towards the piston. Number of friction surfaces : 14 1 4 7609ATM230 制 Mount end plate (1) and fix disk package by means of snap ring (2) (e.g. thickness = 2.65 mm / recommended value). 2 1 7609ATM231 3-153