侍 The figure left shows the installation position of the individual clutches in the housing rear part one more time. KV AN K2 (13) Fix clutches K1, K2, K3 and K4 by using a handle. Handle 5870 260 010 KR K4 K1 K3 侍 Clutches KV, KR and input shaft (2) are only fixed by the gear chain. S Check all rectangular rings, grease and align them centrically. 7609ATM320 (14) Pivot housing rear part 180˚ by using a lifting device. 1 Clutch KV 2 Input shaft 3 Clutch KR 4 Pump shaft 1 侍 Clutch KV, KR and input shaft are only fixed by the gear chain. Attention must be paid that the non-fixed components of the gear chain do not get loose.
3 2 4 7609ATM321 (15) Use the lifting device to bring the housing rear part into contact position with the housing front part, by cautiously assembling the clutches. Then remove handles. 7609ATM322 (16) Remove housing rear part again. 7609ATM323 3-177