Kaiyi — Kaiyi Power Train System Technical Manual

1 (20) Fit both cylindrical pins 10 佴 24 (1) centrically to the mounting face. 1 7609ATM327 Checking of clearance of the gear drive Checking of clearance of the gear drive train (21) Position driving element and rotate KV clutch shaft. 侍 If you notice an interference of the movable parts (e.g. on the screen sheet or on the oil tubes), you must correct this fault. Do this step on all clutch shafts. 7609ATM328 Driving element 5870 345 089 Crank handle 5870 280 007 (22) 1 3 Fix housing front and rear part by means of cylindrical screws (1). 2 1 余 Tightening torque (M10/8.8 佴 50) : 4.69 kgf 余 m (33.9 lbf 余 ft ) Mount fixing plate (2). Mount stud bolts (3).

侍 Wet screw-in thread with loctite (type No. 243). 余 Tightening torque (M8/10.9 佴 25) : 1.53 kgf 余 m (11.1 lbf 余 ft ) 7609ATM329 1 (23) 1 The screw plugs (1) must be mounted with a hydraulic pneumatic pressing tool. 侍 In case of damage the premounted transmission housing rear part should/ must be fully replaced. 7609ATM330 3-179