刲 Fix parking brake (1) on transmission housing using the hexagon screw - guide pin (2). 2 1 余 Tightening torque (M20 佴 1.5) : 4.69 kgf 余 m (33.9 lbf 余 ft ) 7609ATM340 刳 Fix hexagon nut on brake caliper using the open end wrench insert. 余 Tightening torque (M20 佴 1.5) : 23.5 kgf 余 m (170 lbf 余 ft ) 7609ATM341 刴 Insert setting gauge on both sides between base disk and brake disk and hold in its position. 侍 All installation, fitting and maintenance instructions, functional characteristics and setting specifications for the parking brake see page 4-22, "PARKING BRAKE SYSTEM". Clearance : 0.5 - 1.5 mm Nom. clearance :
1.0 mm 7609ATM342 (3) Output flange on converter side Output flange on converter side 刮 Use driver (S) to mount shaft seal 90 佴 120 佴 13, with the sealing lip showing to the oil sump. S Driver 5870 048 237 侍 Use of the specified driver (S) ensures the exact installation position. Fill space between sealing lip and dust lip with grease. Installation position shaft seal see figure TM344. 侍 侍 7609ATM343 3-183