13) REASSEMBLY REASSEMBLY Inductive sensor, Hall sensor, breather, Inductive sensor, Hall sensor, breather, oil filler and oil drain plug oil filler and oil drain plug 2 3 4 1 Mount inductive sensors (1, 2 and 3) with O-rings 15 佴 2. (1) 1 Inductive sensor - turbine speed 2 Inductive sensor - speed/central gear chain 3 Inductive sensor - engine speed 6 余 Tightening torque : 3.06 kgf 余 m (22.1 lbf 余 ft ) Mount breather (4). 余 Tightening torque : 1.22 kgf 余 m (8.85 lbf 余 ft ) 5 7 Mount speed sensor (5) with O-ring 15.54 佴 2.62 and fix it by means of cylindrical screw (6). 8 1 speed sensor (hall sensor) - output speed 余 Tightening torque (M8/8.8 佴 16) :
2.35 kgf 余 m (17.0 lbf 余 ft ) 9 7609ATM366 Mount screw plug M26 佴 1.5 (7) with O-ring 23 佴 2. 余 Tightening torque (M8/8.8 佴 16) : 8.16 kgf 余 m (59.0 lbf 余 ft ) Bring cover (8) with seal into contact position with the housing front part and fix it by means of hexagon screws (9). 余 Tightening torque (M8/8.8 佴 18) : 2.35 kgf 余 m (17.0 lbf 余 ft ) (2) Mount oil drain plug with O-ring 35 佴 2 (1). 4 余 Tightening torque (M38 佴 1.5) : 8.16 kgf 余 m (59.0 lbf 余 ft ) Bring oil level tube (2) with seal into contact position with the housing front part and fix it by means of hexagon screws (3). 2 余 Tightening torque (M8/8.8 佴 50) :
3.47 kgf 余 m (25.1 lbf 余 ft ) 3 5 7609ATM367 1 Fasten dipstick (4) in oil level tube. Fix identification plate (5) to the housing front part. 侍 Use loctite (type No. MS 9360). 3-191