Kaiyi — Kaiyi Power Train System Technical Manual

Pipe - System pressure to lock-up Pipe - System pressure to lock-up clutch valve clutch valve 到 Fix pipes (1) with hollow screws (3) and O-rings and screw nut (2). 3 Fit O-ring 13 佴 2 on hollow screw (3), insert into eye of pipes, mount O-ring 18 佴 2.5. 余 Tightening torque : 4.59 kgf 余 m (33.2 lbf 余 ft ) 2 1 7609ATM398 Fixing of screw nut (2). 余 Tightening torque : 4.59 kgf 余 m (33.2 lbf 余 ft ) Pipes - System pressure from lock-up Pipes - System pressure from lock-up clutch valve to lock-up clutch clutch valve to lock-up clutch 4 刱 Fix screw-in sleeve (1). 1 余 Tightening torque : 4.59 kgf 余 m (33.2 lbf 余 ft ) 3 2 Adjusting screws 5870 204 036 侍 Wet screw-in thread with loctite (type No.

243). 7609ATM399 Fix pipes (2) with screw nut (3 and 4). 余 Tightening torque (screw nut 3) : 3.57 kgf 余 m (25.8 lbf 余 ft ) 余 Tightening torque (screw nut 4) : 4.59 kgf 余 m (33.2 lbf 余 ft ) (3) Fitting of fine filter (pressure filter) Fitting of fine filter (pressure filter) 刮 1 Fix filter head (1) with new O-rings 34.2 佴 3 to the housing rear part by means of Torx screws (2). 余 Tightening torque (M8/10.9 佴 60) : 3.47 kgf 余 m (25.1 lbf 余 ft ) 2 Socket wrench TX-40 5870 042 004 7609ATM400 3-200