Reassembly conventional differential Reassembly conventional differential (standard) Η Mount two locating pins and press the heated crown wheel onto the differential housing until contact is obtained. Locating pins 5870 204 040 7609AAX086 Θ Insert thrust washer into the differential housing. 7609AAX087 Ι Insert axle bevel gear. 7609AAX088 Κ Insert spider gears with thrust washers into the differential housing and fix them with the spider shaft (long). ц Thrust washers must be positioned with the tabs (see arrow) being located in the recesses of the differential housing. 7609AAX089 3-225