Check brake hydraulics for leakages Check brake hydraulics for leakages ц Before starting the test, completely breathe the brake hydraulics. Then pressurize the brake temporarily (5EA) with p = 100 bar max. High-pressure test : High-pressure test : Build up test pressure p = 100 -10 bar max and close connection to HP pump via shut- off valve. A pressure drop of max 2 % (2 bar) is permissible during a 5-minute testing time. 7609AAX181 Low-pressure test : Low-pressure test : Reduce test pressure p = 5 bar and close shut-off valve. No pressure drop is allowed during a 5-minute testing time. Test media : Test media :
Engine oil SAE 10W HP pump 5870 287 007 Clutch 0501 207 939 Reduction (M18 佴 1.5) 5870 950 161 Oil collector bottle 5870 286 072 Check operability of hydraulic lock Check operability of hydraulic lock differential differential (opt) Build up pressure p = 20 bar max and close connection to HP pump via shut-off valve. Lock on : Lock on : When rotating the input flange, both outputs must have the same direction of rotation. Lock off : Lock off : When rotating the input flange, one side has no movement or has the opposite direction of rotation. 7609AAX182 Prior to putting the axle into operation, fill it with oil according to the related lubrication and maintenance instructions. 3-252