Kaiyi — Kaiyi Power Train System Technical Manual

2) 2) DIFFERENTIAL DIFFERENTIAL (1) (1) Description Description When the machine makes a turn, the outside wheel must rotate faster than the inside wheel. A differential is a device which continuously transmits power to the right and left wheels while allowing them to turn a different speeds, during a turn. The power from the drive shaft passes through bevel pinion (1) and is transmitted to the bevel gear (2). The bevel gear changes the direction of the motive force by 90 degree, and at the same time reduces the speed. It then transmits the motive force through the differential (3) to the axle gear shaft (4).

3 2 4 1 770-3 [3-26(1)] (2) (2) When driving straight forward When driving straight forward When the machine is being driven straight forward and the right and left wheels are rotating at the same speed, so the pinion gear inside the differential assembly do not rotate. The motive force of the carrier is send through the pinion gear and the side gear, therefore the power is equally transmitted to the left and right axle gear shaft.

Pinion gear Side gear Side gear Axle gear shaft Carrier Pinion gear 770-3 [3-26(2)] (3) (3) When turning When turning When turning, the rotating speed of the left and right wheels is different, so the pinion gear and side gear inside the differential assembly rotate in accordance with the difference between the rotating speed of the left and right wheels. The power of the carrier is then transmitted to the axle gear shafts. Swing Pinion gear Side gear Side gear Carrier Pinion gear Ring gear 770-3 [3-26(3)] 3-76