3-87 Problem Cause Remedy Torque converter stall RPM too low Low engine power. Mechanical malfunction. Do engine power test. Remove and inspect torque converter. Transmission pressure light comes ON when shifting from forward to reverse (all other gears OK) Low oil level. Cold oil. Leak in reverse pack. Add oil. Warm oil to specification. Do transmission pressure, pump flow, and leakage check. Transmission pressure light comes ON for each shift Cold oil. No time delay in monitor. Restriction in modulation orifice. Stuck PPC valve. Low transmission pressure circuit. Leak in transmission pressure circuit. Failed transmission pump. Clogged filter. Warm oil to specification. Do monitor check.
Remove orifice and inspect for restriction and/or plugging. Remove and inspect. Do transmission system pressure test. Do converter out pressure test. Do transmission pump flow test. Inspect filter. Replace.