9. POSITION FOR STICKING SAFETY LABELS 1. Cautions for checking engine room 5. Warnings for leaving operator’s seat I WHILE ENGINE IS RUNNING: 1. DO NOT OPEN COVER. I OBSERVE THE FOLLOWING CAUTIONS WHEN STARTING THE MACHINE OR WHEN YOU LEAVE OPERATOR’S SEAT AFTER PARKING THE MACHINE: 1. SET THE TRANSMISSION LEVER INTO NEUTRAL POSITION AND LOCK IT WITH THE SAFETY LEVER WHEN APPLICABLE. 2. LOCK THE BRAKES. 3. LOWER THE WORKING EQUIPMENT TO THE GROUND AND LOCK THE LEVER. I 2. KEEP AWAY FROM FAN AND FAN -BELT. I 2. Warnings for opening radiator cap 6. Cautions before operating machine DO NOT LOOSEN CAP WHEN WATER TEMPERATURE IS HIGH.
IF LOOSENED, BOILING WATER MAY GUSH OUT BECAUSE OF HIGH INTERNAL PRESSURE. 3. Cautions for inspection and maintenance WHEN CARRYING OUT MAINTENANCE, 1. PARK THE MACHINE ON LEVEL GROUND. 2. LOWER WORK EQUIPMENT TO THE GROUND, AND LOCK THE LEVER. 3. DO NOT GO UNDER MACHINE WHEN IT IS RAISED BY THE WORK EQUIPMENT. 7. Cautions for opening hydraulic tank cap 1. ALWAYS STOP ENGINE WHEN REMOVING CAP. 2. ~0 NOT LO&EN CAP WHEN OIL TEMPERATURE IS HIGH. IF LOOSENED, OIL MAY GUSH OUT. 3. SLOWLY OPEN HYDRAULIC OIL TANK CAP AND RELEASE INTERNAL PRESSURE COMPLETELY. 4. DO NOT OPEN DRAIN PLUG zH;yGCJIL TEMPERATURE 4.
Warnings for adjusting track tension When replacing the above caution plates, the part number is 114-98-44110. Please order them from your Komatsu distributor. l-22