12. OPERATION 12.14 CHECK AFTER STOPPING ENGINE 1. Walk around the machine and check the work equipment, paintwork, and undercarriage, and check also for leakage of oil or water. If any abnormalities are found, repair them. 2. Fill the fuel tank. 3. Check the engine compartment for paper and debris. Clean out any paper and debris to avoid a fire hazard. 4. Remove any mud stuck to the undercarriage. 12.15 LOCKING Always lock the following places. 0 Top cover on the engine hood 0 Side cover on the hydraulic tank REMARK Use the starting switch key to and @I. open and close cover 0 Commercially available locks can be fitted to the following places. 0 Battery inspection cover 2-39