DRESSTA Co. Ltd. 560C99/1E — 5.5. SEASONAL PREPARATION

SECTION 5 MAINTENANCE Page 14 LUBRICATION Fig. 5.7. Bucket Link Fittings Fittings are arranged symmetrically at both ends of the link Fig. 5.8. Bolster Pivots Fittings Fittings are arranged symmetrically at both ends of the link. 5.5. SEASONAL PREPARATION GENERAL Mechanical efficiency is enhanced during seasonal air temperature changes, when these instructions are followed. OPERATION IN SUB-ZERO WEATHER. Wheel loaders left outside for prolonged periods in sub-zero weather will suffer from "cold-soak." Lubricants become viscous and incapable of lubricating moving parts. Extreme wear could result to the engine, transmission and final drives unless proper precautions are taken.

A source of outside heat is necessary under these conditions. There are electric as well as propane-fired engine coolant heaters available. Gas-fired forced air heaters may also be obtained to heat the transmission and final drives. If a loader is to be used in low temperatures it is best to order a machine designed for operation in low temperatures, which is equipped with necessary heaters. OM560C99/1E DRESSTA