DRESSTA Co. Ltd. 560C99/1E — 6.11. TORQUE VALUES FOR STANDARD ENGLISH FASTENERS

SPECIFICATIONS SECTION 6 Page 21 STANDARD METRIC FASTENERS Chart 1 6.11. TORQUE VALUES FOR STANDARD ENGLISH FASTENERS Chart 2 provides tightening torque for general purpose applications using original equipment standard hardware as listed in the Parts Catalog for the machine involved. DO NOT SUBSTITUTE. Original equipment standard hardware is defined as Type 8, coarse thread bolts and nuts and thru hardened flat washers (Rockwell "C" 38-45), all phosphate coated and assembled without supplemental lubrication (as received) condition.

Phosphate coated bolts used in tapped holes in steel or gray iron, phosphate coated bolts used with phosphate coated prevailing torque nuts (nuts with distorted threads or plastic inserts), phosphate coated bolts used with copper plated weld nuts. Markings on bolt heads or nuts indicate material grade ONLY and are NOT to be used to determine required torque. DRESSTA OM560C99/1E Nominal Thread Diameter [mm] Standard Torque ±10% [Nm] 6 10 7 16 8 23 10 46 12 80 14 125 16 200 18 275 20 385 22 530 24 670 27 980 30 1330 33 1790 36 2325