DRESSTA Co. Ltd. 560C99/1E — 4.4. SUSPENSION SEAT

SECTION 4 OPERATING Page 20 SUSPENSION SEAT Fig. 4.9. Suspension Seat 1. Weight indicator 2. Weight adjustment knob 3. Height adjustment knob 4. Backrest angle adjustment lever 5. Seat travel lever 6. Backrest profile adjustment knob 7. Backrest profile adjustment knob 8. Armrest angle adjustment screw This is a suspension seat with several adjustments to provide maximal comfort to the operator. Adjustment to operator’s weight – seated in the operator’s seat turn adjustment knob (2) clockwise or counterclockwise until proper weight value corresponding to the operator’ s weight is in the weight indicator window 1.

Seat travel adjustment - pull up the lever 5 (on the right hand side of the seat) and slide the seat forward or rearward to the desired position and lock with the lock lever. Seat height adjustment - turn knob 3 clockwise to lift the seat cushion and counterclockwise to lower the seat cushion. Backrest angle adjustment - pull up lever 4 to release the lock. Upon adjustment of backrest angle (pressing the backrest) apply the lock. Backrest profile adjustment – performed with two knobs: knob 6 located on the left hand side of the seat and knob 7 located on the right hand side of the seat.

Turn knob 6 to change backrest profile in the middle part, turn knob 7 to change lower and upper part of backrest profile. Armrest angle adjustment – performed with screws 8 located under armrests (tilt back armrests to facilitate adjustment). OM560C99/1E DRESSTA