OPERATING SECTION 4 Page 39 LOADER TECHNIQUES Fig. 4.32. Loading Sequence Transport filled bucket in the roll back position raised approximately 0.5 meter above the ground. A loaded bucket must never be transported in the fully raised position. Keep the travel speed reasonable for safe operation. Upon reaching the truck, raise the bucket high enough to clear the truck body, Fig. 4.33. Dump load slowly to reduce the shock of weight transfer to the rear axle when the bucket is emptied. Shake bucket only to loosen dirt from within. WARNING! Transport loads with bucket in carry position only. A loaded bucket must never be transported in the fully raised boom or with boom in horizontal position.
DRESSTA OM560C99/1E