Home Location Register (HLR) Release 9.1 Subscriber Provisioning Reference Manual Attributes and Values Table 40: Route Select Failure DP for Camel O-CSIs mandatory Attributes Table 41: Route Select Failure DP for Camel O-CSIs optional Attributes 120 910-6701-001 Revision A, June 2013 Attribute Value Range Default Description DpType 4 (RouteSelectFailure) N/A Detection Point Value. This indicates which Dp type is provisioned. GsmScfId 0 to 2147483647 N/A ID of list containing the CAMEL server addresses. ServiceKey 0 to 2147483647 N/A Attribute Value Range Default Description ProvisionState 0,1 0 This flag can be provisioned to indicate the Provision state of a specific Camel CsiDp Data.
Note: Setting this parameter to 0 (not provisioned) doesn’t delete the entry provisioned in the database, it simply means that the system won’t support this service for the subscriber. DefaultCallHandling 0 or 1 0 Default Call Handling indicates whether the call shall be released or continued as requested in case of error in the gsmSSF to gsmSCF dialogue or in case the call is submitted to call gapping in the gsmSSF. A default call handling shall be associated to each Service Key. 0 = Continue call 1 = Release call CauseValueCritPresent 0 or 1 0 This indicates the presence of Cause Value criteria information. 0 = not present 1 = present