Home Location Register (HLR) Release 9.1 Subscriber Provisioning Reference Manual Attributes and Values Table 46: Terminating Busy DP for Camel T-CSIs mandatory attributes Table 47: Terminating Busy DP for Camel T-CSIs optional attributes 129 910-6701-001 Revision A, June 2013 Attribute Value Range Default Description DpType 13 (TerminatingBusy) N/A Detection Point Value. This indicates which Dp type is provisioned. GsmScfId 0 to 2147483647 N/A ID of list containing the CAMEL server addresses. ServiceKey 0 to 2147483647 0 The Service Key identifies to the gsmSCF the service logic. Different Service Keys may be associated to different Trigger Detection Points (TDPs).
Attribute Value Range Default Description ProvisionState 0,1 0 This flag can be provisioned to indicate the Provision state of a specific Camel CsiDp Data. Note: Setting this parameter to 0 (not provisioned) doesn’t delete the entry provisioned in the database, it simply means that the system won’t support this service for the subscriber. DefaultCallHandling 0 or 1 0 Default Call Handling indicates whether the call shall be released or continued as requested in case of error in the gsmSSF to gsmSCF dialogue or in case the call is submitted to call gapping in the gsmSSF. A default call handling shall be associated to each Service Key. 0 = Continue call 1 = Release call