BAIC — MSISDN-IMSI Profile Association

Home Location Register (HLR) Release 9.1 Subscriber Provisioning Reference Manual 169 910-6701-001 Revision A, June 2013 Attribute Value Range Default Description For one of the two SIMs of a subscriber (SubscriptionID), one of its provisioned IMSI-MSISDN couple must have a Priority set to ‘1’ and for the other one of the two SIMs, one of its provisioned IMSI-MSISDN couple must have a Priority set to ‘2’. CLI example: If the MSISDN with Priority ‘1’ on SIM 1 cannot be reached for any CFNRc scenario, the Tekelec ngHLR automatically sends the MSISDN with Priority ‘2’ of the SIM 2 as the ForwardToNumber in the SRI-ack.

This allows the call to be redirected to the SIM for which the MSISDN is set to Priority ‘2’. Reachable Bool 1 This parameter indicates to the Tekelec ngHLR which MSISDN-IMSI association to choose among all the different associations in order to find out which SIM can be reached. 0: The MSISDN-IMSI association is not reachable. 1: The MSISDN-IMSI association is reachable, which means that the SIM associated to this IMSI will be reached by incoming calls. Provisioning TIPs: • All the MSISDN-IMSI profile associations defined for one single SIM with the same MSISDN must all have the ‘Reachable’ flag set to the same value.

• There must be one and only one reachable SIM among the ones that have MSISDN-IMSI associations that use the same shared MSISDN. A SIM is reachable if the MSISDN’s ‘Published’ flag and the MSISDN-IMSI association’s ‘Reachable’ flag are both set to ‘1’ (true). By default, the ‘Reachable’ flag is set to ‘1’. For a MSISDN, if there is no ‘Reachable’ flag set to true (‘Reachable=1’) for one of