Home Location Register (HLR) Release 9.1 Subscriber Provisioning Reference Manual Table 86: PlmnSpecificSSBsg optional attributes Note: To activate this service, the Registration State must be set to 1, ActState_A must be set to 1, and the ActState_Q must be set to 0.
CLI Example Subscriptions[]> Subscription[SubscriptionID= sub-1]> SubscriberProfile[HlrServiceProfileID = 1]:PlmnSpecificSS[Type = 245]>add PlmnSpecificSSBsg[BsgId = 1; ActState_A = 1; ActState_Q = 0; RegState = 1] 180 910-6701-001 Revision A, June 2013 Attribute Value Range Default Description 12 (VoiceGroup Services) 8-All Data Circuit Synchronous (BS18), 12-Voice Group Services (TS91, TS92) Attribute Value Range Default Description ActState A _ ActState Q _ 0 or 1 0 or 1 0 0 Activation state: Set A bit to: Set Q bit to: Active & Operative 1 0 Active & Quiescent 1 1 Not Active 0 0 or 1 Note: 1: Service can only be invoked if Activation State is Active and Operative (A=1, Q = 0). Note: 2:
Keep in mind that setting this parameter to 0 (not provisioned) doesn’t delete the entry provisioned in the database, it simply means that the system won’t invoke this service for the subscriber. RegState 0 or 1 0 Supplementary Service Registration State 0 = not registered 1 = registered