Home Location Register (HLR) Release 9.1 Subscriber Provisioning Reference Manual Table 88: Emlpp optional attributes 182 910-6701-001 Revision A, June 2013 Attribute Value Range Default Description the system won’t support this service for the subscriber. DefaultPriority integer 0 Defines the priority level which shall be assigned to a call if no explicit priority is indicated during call set-up. MaximumPriority integer 0 Indicates the highest priority level the subscriber is allowed to apply for an outgoing call set-up. Attribute Value Range Default Description ActState A _ 0 or 1 0 Identifies the active state of the service. Note:
Service can only be invoked if Activation State is Active and Operative (A=1). 1=active and operative service 0=inactive service Note: Setting this parameter to 0 (not provisioned) doesn’t delete the entry provisioned in the database, it simply means that the system won’t invoke this service for the subscriber. RegState 0 or 1 0 Supplementary Service Registration State 0 = not registered 1 = registered