Home Location Register (HLR) Release 9.1 Subscriber Provisioning Reference Manual HLR Volatile Data Provisioning HLR volatile data The entities used depend on the value configured for the HlrConfig entity’s ‘VolDataOptimizationOn’ flag: If flag is set to ‘OFF’ (0), the HlrBinaryVolData entity is the only one used to store volatile data. If the flag is set to ‘ON’ (1), these entities store volatile data: HlrVolatileData HlrVolMwData HlrSpVolGgsnData All subscriber volatile data can be viewed by displaying these three entities.
Notes for upgrades from Release 4.1 or earlier If the software has been upgraded just recently from release 4.1 or earlier (releases that used the HlrBinaryVolData entity) the HlrBinaryVolData entity will remain in use only until the data is being migrated from the HlrBinaryVolData to the HlrVolatileData entity. During this transitional period, the volatile data of the subscribers for which MAP transactions occurred prior to the upgrade of the system can be viewed in the HlrBinaryVolData entity. Gradually, this entity will empty out due to the transfer of the volatile data into the new entities.
A month after the upgrade of the system, the inactive subscribers left in this entity are all transferred at a rate of 200 subscribers per night, starting at 3:00am. Eventually, the HlrBinaryVolData entity will empty out completely, at which point it will become obsolete and the transitional period will be over. During this transitional period, the operator has to access, through the Tekelec CLI, the HlrBinaryVolData entity in addition to the HlrVolatileData[],HlrVolMwData[] and HlrVolGgsnData[] entities in order to get the volatile data information for all the active subscribers.
Once the migration is completed, the only entities used will be the HlrVolatileData, HlrVolMwData and HlrSpVolGgsnData entities. Once the data has been provisioned into the HLR, the user can only view this data. It cannot be modified. For more information on the transitional period and the Volatile Data Optimization that has been implemented, refer to the CD-0072 Main Release Notes Rel4.1. HLR Binary Volatile Data Name HlrBinaryVolData Description Entity that contains the binary volatile data. 186 910-6701-001 Revision A, June 2013