Home Subscriber Server (HSS) Release 9.1 Subscriber Provisioning Reference Manual 234 910-6701-001 Revision A, June 2013 Attribute Value Range Default Description Private Identity for authentication. NASSLineIdentifier string N/A Parameter sent in the MAA for authentication when the algorithm scheme used is “NASS-Bundled” (TISPAN). This information element contains fixed broadband access line identifier associated to the user. MaxBadCounterPasswd integer 0 (unlimited) The limit of the Bad Counter Password. When receiving a SAR “AUTHENTICATIONFAILURE” _ that makes the counter reach the limit, the HSS locks the private ID. ContactAddress SIP URI Important:
When provisioning this parameter, all the data must be entered on a single line. N/A SIP URI contact address and path for terminating calls. When the StaticRegistration attribute is set to 1 (Statically Registered), this field must be provisioned. It contains the SIP contact address of the terminal (P-CSCF address) and when present in the SAA or PPR, this AVP indicates that the Public Identity ID/Private Identity ID set was administratively registered. AccessRestriction String (100 char) Important: When provisioning this parameter, all the data must be entered on a single line.
N/A It contains a list of allowed IP addresses/ranges and when present in the MAA, this AVP provides restrictions on the access network and IP address used by the UE. AcceptNoVector 0 (Off) Or 1 (On) 0 (Off) This flag indicates if the HSS must send an authentication success or failure when the required authentication algorithm is not supported by the HSS.