User Interfaces Release 9.1 Subscriber Provisioning Reference Manual The Oamp manager accepts XML template commands structured using the following xml tags: …Attribute names … Template request identifications Templates are formulated with these following parts: Template identification Attribute name Template request identification Template identification A template tag (e.g., ) must be used to identify the Template and to specify whether or not the attributes that are not mandatory can or cannot be modified. The " template id " attribute allows to identify the template with a Template ID number.
This identification will then be used later when provisioning subscribers with an Invoking file (XML "provisioning commands" written in Requests of type template) to refer to the proper template. The template must also be defined by the following attribute: " otherAttributesModifiable ". This XML field can take one of the following two values : "Y" or "N" to indicate whether or not the values of the attributes defined in the referenced Template requests can or cannot be modified by commands in the Invoking file. The meaning of the two possible values is as follows: "Y":
The values of the attributes that are defined in the referenced Template requests and that are not listed in the 'Attribute Name' section of the template, can be modified by commands in the Invoking file. In this case, any of the attributes defined in the referenced template requests can be provided in the Invoking file commands along with new values and these new values will overwrite the ones defined in the template requests. "N": The values of the attributes that are defined in the referenced Template requests and that are not listed in the 'Attribute Name' section of the template, cannot be modified by commands in the Invoking file.
Only the attributes listed in this template can be modified by commands in the Invoking file. Attribute name The part of the Command Template that must be used to specify the name of the attributes that can or must be modified. This field can be created as many times as there are attributes that can or must be modified. The attribute " attr name " allows to specify the name of the modifiable attribute. When creating this field, the following attribute can also be specified: " mandatory ". This XML field provides information on whether the value of the attribute must absolutely be defined in the Invoking file or whether it may or may not be defined optionally in the Invoking file. Y":
The attribute and its value must absolutely be defined in the Invoking file. All the attributes that have been implemented as 'mandatory' in the system's database must have the XML field "mandatory" set to "Y". 24 910-6701-001 Revision A, June 2013