BAIC — AssignIPAddress()

Authentication, Authorization, and Accounting (AAA) Release 9.1 Subscriber Provisioning Reference Manual EnableUser() The EnableUser operation enables an existing AAA user that was disabled. This operation can be performed to enable a AAA user after it was disconnected. CLI Command Syntax :Hss[]:AAAUserId[AAAUserName = aaa-1; AuthMethod=0]> EnableUser() DisplayUserStatus() The DisplayUserStatus operation allows to display a AAA user’s dynamic IP Addresses information. The IP Address (es) dynamically allocated to that AAA User are displayed, as well as the NAS IP Address and the CallingStationID.

With the IPAddress allocation based on Calling-Station-Id attribute feature, multiple entries are allowed in this table, each with a different Calling Station ID (MSISDN in 3GPP Gi interworking). Note: Executing this operation for a AAA user that has a AAA Allocation Policy of Type ‘DHCP_IDENT’ or ‘NO_IP_ALLOC’ assigned to it, will display the value ‘Not Allocated’ as the AAA IP address since in those cases the AAA doesn’t allocate an IP address. CLI Command Syntax :Hss[]:AAAUserId[AAAUserName = aaa-1]>DisplayUserStatus() AssignIPAddress() The AssignIPAddress operation allows a static IP Address to be associated to a specific Called Station (APN) or Realm.

If desired, a Calling Station (MSISDN) can also be added, in order to identify the subscriber. When executing this operation for a subscriber, the Called Station must be specified in the indicated field; the realm, on the other hand, doesn’t need to be entered, it is extracted from the AAAUserName. With this information, the AAA server associates an IP Address to the Called Station or Realm from the configured IP Address pools. This IP Address is said to be static and becomes unavailable when the AAA server performs a dynamic allocation of an IP address. For a single subscriber, a different static IP Address can be assigned for each Called Station (APN) or Realm.

Moreover, for a subscriber’s specific Calling Station (MSISDN), different static IP addresses can be assigned for different Called Stations (APNs). When executing the AssignIPAddress () operation, the following parameters can be specified: CalledStation: optional parameter that represents the Called-Station-Id (e.g., APN) to which the static IP address is associated. Whenever an Access-Request with this Called-Station-Id arrives, the corresponding static IP address will be allocated. The value supported for this parameter is ‘string’.

If no CalledStation is indicated and the AAAUserName contains a Realm (i.e., the AAAUserName is in the format user@realm ), the static IP address is associated with the user’s realm. CallingStation: optional parameter that represents the Calling-Station-Id (e.g., MSISDN) that identifies the subscriber to which the static IP address is assigned. The value supported for this parameter is ‘string’. 296 910-6701-001 Revision A, June 2013