User Interfaces Release 9.1 Subscriber Provisioning Reference Manual Note: In the case where the XML's reply contains a response as follows: affected=”0” , this means that the XML request has been validated and processed, but no provisioning changes needed to be written in the database. For example, this response can be returned if the XML request is valid and can be processed by the system, but is for a subscriber that doesn't exist in the system's database. In the case of XML template, the following behavior is used: When an error occurs during the execution of the template, the template execution is stopped at the first faulty template request.
The system returns the error code associated to the failure cause of the first faulty template request. The result doesn't include any information indicating which request failed. For example, if we take a template (template1) consisting of 10 template request (TR1, TR2,…TR10). We send a command that activates template1. The system will start to sequentially send TR1 through TR10. Assuming TR1 and TR2 are successful but TR3 fails with error code 1030. The system will stop sending the remaining request and will return Please refer to the “TIP” given in the “Operation Request” section for the structure in which an operation request followed by a system reply using the one line format must be.
For XML examples of a system reply for the HLR, SIP and HSS, please refer to the chapter 5 in the SDM Subscriber Provisioning – User Guide . 39 910-6701-001 Revision A, June 2013 Field name Value Description A valid XML request is an XML request that has no syntax errors and that can be processed by the system. An invalid XML request is an XML request with syntax errors that cannot be processed by the system. Note that an XML request can be valid but cannot be processed due to errors found in the other requests sent within the same transaction. 0: The request has been validated and processed. 1: The request has been validated but not processed.
If the value is not "0" or "1", refer to the “Error Notifications” chapter of the SDM Monitoring, Maintaining, Troubleshooting – Reference Manual for a description of each error code that can be generated by the system. affected Integer This field indicates the number of lines that are read (select request), inserted (insert request), modified (update request) or deleted (delete request) from the database. This field takes the value "0" if nothing has been done in the database. When this field is returned with a "0" value, this means that nothing has been done in the system's database.