User Interfaces Release 9.1 Subscriber Provisioning Reference Manual User Security Management through CLI Users can be managed only by the users in Group Admin, except for the fact that each user can change their own password. Please refer to the "Users" section of the SDM Product Description for details on the Admin Group. This section describes the CLI commands to manage users through the CLI. User Name User Description This is used to define users and their user name and password.
CLI Navigation Oamp[]> SecurityManager[]> User CLI Inherited Attributes None CLI Command Syntax Oamp[]> SecurityManager[]> add User [UserName = string; Password = string; GroupName = string] Operations Permitted Display, add Attributes and Values Table 8: User attributes 64 910-6701-001 Revision A, June 2013 Mandatory Attributes Value Range Default Description UserName Up to 20 characters except the following: "/ \ [] : ; | = , + * ^ " N/A Identifier that uniquely identifies a user. Password Minimum of 6 characters and up to 64 characters encrypted. UserName (ex: UserName admin, UserPasswd: admin) Encrypted password unique for each Group a user is associated to.