BAIC — User Application Map

User Interfaces Release 9.1 Subscriber Provisioning Reference Manual 79 910-6701-001 Revision A, June 2013 Mandatory Attributes Value Range Default Description • operation • surveillance • admin • batch • simprov ApplName Up to 20 characters except the following: "/ \ [] : ; | = , + * ^ " The pre-defined applications are: • Cli • WebCI • CmdFileLoader • SNMP • LdapDataServer • PolicyManager N/A Identifier that uniquely identifies an application. Optional Attributes Value Range Default Description LogOption • 0 NoLog • 1 LogAll • 2 LogRead • 3 LogMod 0 This parameter indicates which of the following logging options the SDM system should follow for each user-application combination: 0 NoLog:

No logs are saved by the system. 1 LogAll: The system saves logs for all the actions taken by this user on this application. WARNING: This could impact the performance of the system during high traffic. 2 LogRead: The system saves logs only for the reading actions taken by this user on this application. 3 LogMod: The system saves logs only for the modifying actions taken by this user on this application.