BAIC — Subscriber Profile (Bearer Services, Teleservices, Call Barring, PreferredRoutingNetworkDomain)

Home Location Register (HLR) Release 9.1 Subscriber Provisioning Reference Manual 96 910-6701-001 Revision A, June 2013 Attribute Value Range Default Description SmsTemplate Name (WebCI) to use for this subscriber when receiving an MT-SMS MAP SRI for SM message. _ _ In the CLI, the SmsTemplateId attribute uses a numerical value in the Subscriber Profile to refer to an MT-SMS Routing Template. In the WebCI, the SmsTemplateName attribute uses a character-based value in the Subscriber Profile to refer to the MT-SMS Routing Template. 0 or 'Not Defined':

When the SmsTemplateId is set to 0 (CLI) or when the SmsTemplateName is set to 'Not Defined' (WebCI), it refers to the default MT-SMS Routing Template (TemplateId=0 and TemplateName=Not Defined). In this case, the Tekelec ngHLR does not reroute the MT-SMS and follows the standard process, by responding to the Originator SMS-GMSC with a MAP SRI for SM Ack, which includes an IMSI and a _ _ MSC id of where the subscriber is roaming. Pre-requisites: • Prior to being able to set a subscriber profile to an MT-SMS Routing Template, the latter must already be configured in the Tekelec ngHLR; see Provisioning the Tekelec ngHLR for MT-SMS Routing (System Configuration User Guide).

• For the Tekelec ngHLR to route the MT-SMS request for this subscriber (as per the template defined in its subscriber profile), the MT-SMS Routing and/or MT-SMS Relay functionalities must first be activated for the entire Tekelec ngHLR. For instructions on how to do so, refer to the "Viewing the activation status of HLR features and activating/deactivating them individually" section of the SDM System Configuration - User Guide. Subscriber State 0,1 1 This allows to enable or disable the subscriber status. 0: disable 1: enable Note: Setting this parameter to 0 (disable) doesn’t delete the entry provisioned for this subscriber in the database.