CONTROLS - Dash Switches Ignition Key Switch The ignition key switch located to the left of the steering column has four positions: ACC (Accessories), OFF, ON, and START. See also Ignition Key Switch on page 107. • Marker Lamps • Clearance lamps • Identification lamps • License plate lamps. Assist until the LDW system is re-ena- bled. Lights, Automatic Lane Departure Warning (LDW) Disable Lights, Auxiliary 3 The Automatic Light switch - when activated - will illuminate the exterior lights of the vehicle when a low light condition is detected, and will extinguish the lights when the lighting conditions brighten. (Do NOT confuse this feature with "automatic high beam control").
When Parked with the ignition switch in the ON position and Auto Switch enabled, the vehicle will turn on the following lights when a low light condition is detected: • Park Lamps • Tail Lamps • License plate lamps When Driving and Auto Switch enabled, the vehicle will turn on the following lights when a low light condition is detected: • Low Beam Headlamps • Park Lamps • Position Lamps • Tail Lamps Turn switch on for Auxiliary Lights. The Lane Departure Warning (LDW) Disable switch disables both audible and visual Lane Departure Warning alerts for 15 minutes (or until the next ignition key cycle) after which time LDW will automatically re-enable.
This switch will not affect any audible or visual alerts for the Adaptive Cruise Control (ACC) feature. This switch lights up green when active. Lights, Beacon Turn switch on for Beacon Light(s). Lights, Daytime Running (Override) NOTE Disabling Lane Departure Warning (LDW) will also disable Lane Keeping This switch overrides the normal operation of the Day Time Running Light (DRL) system. During normal operation, the DRL Y53-6126-1A1 (01/21) 101