PACCAR 567 — Air Conditioner Operating Tips

CONTROLS - Heating and Air Conditioning Adjust the air temperature to maximum cool by rotating the temperature dial counterclockwise. Engage the air conditioner compressor by pressing the air conditioner button. Set the air source to recirculation mode by pressing the outside air/ recirculation air button. The button indicator light should be illuminated. vents should remain open to allow AUTO mode to function properly. To maintain the selected cab temperature, AUTO mode may provide an air temperature from the vents that differs from the temperature set point.

To ensure proper operation, it is recommended that the driver redirects the air instead of adjusting the temperature set point or closing the vent. The system may have difficulties in obtaining the desired cabin temperature if the temperature setting is repeatedly changed. The mode of air distribution inside the cab is set using the air distribution dial. Five icons on the dial indicate the primary mode options. The driver may also select a secondary mode in between the primary modes indicated by points on the dial. Airflow is provided to the side windows in all modes. sufficiently to provide required coolant temperatures.

Air Dehumidification 3 The air conditioner system can be used to reduce the humidity level of the cab and clear fog from the windshield. Adjust fan speed to the desired airflow setting. Engage the air conditioner compressor by pressing the air conditioner button. Set the air source to outside air mode by pressing the outside air/ recirculation air button. The button indicator light should NOT be illuminated. For Maximum Heating Adjust the fan speed to high by rotating the fan control dial clockwise. Set the air distribution dial to the floor setting. Adjust the air temperature to maximum heat by rotating the temperature dial clockwise.

NOTE Outside Air/Recirculation Air The A/C compressor may not engage when the outside temperature is below 34єF (1єC). Selecting air recirculation mode completely isolates the cab interior from the outside air. This mode is helpful in preventing dust, pollen, and odors from entering the cab. Additionally, recirculation mode can reduce the amount of time needed to cool down the vehicle while in maximum cool down. Note that the mode may increase fogging on the windshield. A coarse air filter is NOTE The engine must be at operating tem- perature for maximum heating.

If oper- ating in AUTO mode, heating airflow is not allowed until the engine warms Cab Air Distribution Equal distribution of air is important in maintaining a constant cab interior temperature. For best performance, all 122 Y53-6126-1A1 (01/21)