PACCAR 567 — How to Set the Variable Road Speed Limiter

DRIVING - Driver Assistance 3. Press the "SET +" button to set the cruise speed. Canceling and Resuming Cruise Control There are four ways to cancel the set speed in cruise control: 1. Tap the brake pedal 2. Tap the clutch pedal 3. Turn the cruise control system OFF (ON/OFF button on steering wheel) 4. Press the Variable Road Speed Limit buttons Using the brake or clutch pedal to cancel set speed allows the operator to use the RESUME feature. Pressing the "- RES" button will resume the vehicle speed previously set. Pressing ON/OFF once will deactivate cruise control, and pressing it twice will turn off the system. When turning the system OFF, the previous set speed is removed from memory.

The operator will have to manually reset the vehicle's cruise speed. braking methods to enforce the limit including ignoring further input from the accelerator pedal, but will only use engine braking if available and enabled. VRSL replaces the Cruise Control indicator when active and will show the VRSL limit to the right of the indicator. This limit is shown in gray but turns white when actively limiting vehicle speed. MX engines, additionally, show "LIMITED" on the speedometer. When active, the VRSL speed limit can be changed using the LIM+ and LIM- buttons in the right, steering wheel switch pod. See How to Set the Variable Road Speed Limiter. Enabling VRSL will disable Cruise Control.

VRSL can be canceled by A long press of the Cruise Control ON/OFF . Stopping then parking the vehicle. Activating the PTO (option) (MX engine only). NOTE Cruise Control may not hold the set speed going down hills. If the speed increases going down a hill, use the brakes to slow down. This will cancel Cruise Control. 4 The cruise set speed will appear in the display. How to Change Cruise Set Speed The vehicle cruise control must be ON and the cruise speed engaged. 1. To increase vehicle speed Press or long press SET + until you reach the desired speed, or Use the Accelerator Pedal to reach the desired speed, and then press the Set + 2.

To decrease vehicle speed, press or long press RES – until you achieve the desired speed, and then press SET + . The new cruise speed can be seen next to the Cruise Control Indicator. Variable Road Speed Limiter (option) The Variable Road Speed Limiter (VRSL) prevents the vehicle from exceeding a chosen vehicle speed limit. This limit is selected by the operator and can be changed while driving. VRSL uses various How to Set the Variable Road Speed Limiter The Variable Road Speed Limiter (VRSL) cannot establish a limit while the parking brake is set or the PTO is in operation. The minimum VRSL setting is 25 mph (40 kph). 144 Y53-6126-1A1 (01/21)