PACCAR 567 — Off-Road ABS Function Switch (Optional)

DRIVING - Brakes This feature helps improve traction when vehicles are on slippery surfaces or surfaces with poor traction (i.e. mud or snow) by reducing drive wheel overspin. Automatic traction control works automatically in two different ways: If a drive wheel starts to spin, ATC applies air pressure to brake the wheel. This transfers engine torque to the wheels with better traction. If all drive wheels spin, ATC reduces engine torque to provide improved traction. ATC turns itself on and off, you do not have to select this feature. If drive wheels spin during acceleration, the ATC Warning Lamp comes on, indicating wheel spin control is active.

Do not allow the ATC Warning Lamp to remain on continuously for an extended length of time. Extended, continuous use of the ATC can cause overheating of the drive wheel brakes. spin. When this function is in use, the ATC Warning Lamp blinks continuously. WARNING Off-Road ABS Function Switch (Optional) Your vehicle may be equipped with a separate switch to activate an Off-Road ABS function. This function is NOT to be used for On-Highway driving but is intended to be used to improve stopping performance in Off-Highway conditions (e.g., loose gravel and mud). The Off-Road ABS function is accomplished by allowing a "wedge" of material to build-up in front of momentarily locked wheels.

Changes the ABS control limits to allow for a more aggressive ABS function while off-road. Improves vehicle control and helps reduce stopping distances in off- road conditions or on poor traction surfaces such as loose gravel, sand, and dirt. Allows retarders to function independently of the ABS function. If your vehicle does not have an engine retarder, the Off- Road ABS switch will function the same. While the off road mode can improve vehicle control and shorten stopping distances, some steering ability may be reduced on certain surfaces result- ing from the momentarily sliding tires. Always operate your vehicle at safe operating speeds.

Failure to do so may cause you to lose control of the vehicle and could result in an accident or personal injury. 4 CAUTION Never drive your vehicle on improved roads/highways with the Off-Road ABS function turned on. When you drive your vehicle onto an improved road surface or highway, immediately turn off the Off-Road ABS switch. Fail- ure to do so will cause the ABS sys- tem to not function properly in an ABS event under 25 mph (40 km/h) and could result in an accident or personal injury. Deep Snow and Mud Switch A deep snow and mud switch is included with Automatic Traction Control (ATC). The Deep Snow and Mud feature is helpful during acceleration.

This function increases available traction on extra soft surfaces like snow, mud, or gravel, by slightly increasing the permissible wheel Y53-6126-1A1 (01/21) 165