DRIVING - Trailer Operations How to Release the Kingpin Manually 4. Disconnect brake air and electric lines from trailer, and secure lines. 5. Unlock the fifth wheel release handle if necessary, then unlock the fifth wheel. NOTE Do not drive tractor free of trailer. CAUTION 7. If the tractor has a rear air suspension, deflate (dump) the rear suspension enough so that the fifth wheel will smoothly separate from the trailer. Do not deflate the rear suspension be- fore unlocking the fifth wheel. Deflating the rear suspension before unlocking the fifth wheel could cause difficulty during uncoupling and result in dam- age to the fifth wheel and kingpin.
NOTE Suspension Dump Symbol Operating the release handle and un- locking the fifth wheel will depend on the fifth wheel manufacturer. 4 6. Return to cab and release tractor parking brake. 7. Ease tractor forward enough for the kingpin to clear the fifth wheel (about 12 to 18 inches). NOTE 8. Ease tractor forward, clearing the trailer. 9. If the rear suspension was deflated, return rear suspension to its normal height. The specific method required to oper- ate the fifth wheel release handle will depend on the fifth wheel manufactur- er and model. The operator should be familiar with this method prior to at- tempting this procedure. NOTE Do not drive tractor free of trailer.
To release the kingpin and separate tractor from trailer 1. Position the tractor and trailer in a straight line on firm, level ground. 2. Set both the tractor and trailer parking brakes. 3. Exit cab and lower the trailer landing gear. 8. If the tractor has a rear air suspension, deflate (dump) the rear suspension enough so that the Y53-6126-1A1 (01/21) 179